itap Thread seal / screw lock TUB100 liquid anaerobic adhesive, medium, 100 ml

Thread seal / screw lock ITAP TUB100 for metal thread

Specifications

• Content: 100 ml / 110 gr
  
• Composition: anaerobic methacrylic resin
  
• Color: yellow
  
• Viscosity (+25°C – mPa s): 20,000 – 80,000 thixotropic effect
  
• Specific gravity : 1.1 g/ml
  
• Measurement: fluorescent under blue light
  
• Flash point: > +100°C
  
• Maximum thread diameter / maximum tolerance of the connection: M56 / 2″ / 0.30mm
  
• Handling time: 15-30 min
  
• Curing time (reasonable) : 1-2 hours
  
• Curing time (actual) : 3-6 hours
  
• Starting torque (ISO 10964): 18 – 24 Nm
  
• Further torque (ISO 10964): 7 - 14 Nm
  
• Penetration resistance / shear strength (ISO 10123: 6-3 N/mm2)
  
• Temperature range: -55°C – + 150°C
  

Anaerobic adhesive for sealing metal threaded connections.
Adhesive DVGW-approved (DVGW, DIN-EN 751-1) for sealing gas-tight
Connections up to 20 bar / 2″ diameter.

WRAS approved for use with water.
NSF (Cat. P1) approved for sealing connections in the food area.
BAM approved for use with oxygen up to 10bar / 60°C (Ref. No. II-717/2007 E).
For sealing GAS, LPG, compressed air, oils and fuels, industrial liquid, CFC,
Drinking water, chemical substances.

Thanks to a low coefficient of friction, assembly is promoted. The thixotropic effect
prevents the adhesive from dripping off during hardening.
Replaces hemp, sealing tapes and pastes. After curing, a medium-strength thinner is formed film.
Shockproof, vibration resistant and thermal shock resistant. The properties of the seal are shown in a temperature range of -55°C to + 150°C.